Skip to product information
SALE

HT4005-004 4LTR 4L GEAR OIL FREE SHIPPING* 85W/140 API GL4 GL5 85W140 85/140 GEAR OIL HITECH HI-TEC HI-TEC OIL EP MULTIGEAR 85W/140 GL-5 85W140 DIFF Differential Designed to provide: Excellent thermal and oxidative stability to the oil.

$43.66 $99.66
SKU: HT4005-004

Description

 

Product Code: HI4-2448

Product Benefit

Designed to provide:

  • Excellent thermal and oxidative stability to the oil.
  • Much improved oil seal life.
  • Much improved durability to gears.
  • Much improved corrosion protection to yellow metals under both wet and dry conditions.

 

Hi-Tec EP Multigear 85W/140 GL-5 meet or exceed the requirements of:

  • API GL5
  • API MT-1
  • SAE J2360
  • MIL-L-2105D
  • MIL-PRF-2105E
  • Mack GO-J

 

Hi-Tec EP Multigear Oils 85W/140 is a superior new generation XRMR (Extra Range Multigear) gear oils designed to provide very much improved: Thermal stability – XHTR (Extra High Temperature), Oil seal life, Durability (gear surface life), Corrosion protection to yellow metals under both wet and dry conditions.

These improvements overcome the growing concerns of the gear manufacturers (OEM’s – Original Equipment Manufacturers), vehicle and fleet owners in relation to these performance areas when using the previous generation of conventional hypoid extreme pressure drive train lubricants.

Hi-Tec EP Multigear Oils are suitable for the lubrication of car, truck and tractor differentials, final drives, transfer and steering gearboxes and manual transmissions, under both heavy and light service conditions.

Special oxidation resistant paraffinic base oils and high performance XHTR thermally stable extreme pressure (EP) additives are used in Hi-Tec EP Multigear Oils to ensure long service life for transmission drive lines.

Hi-Tec EP Multigear Oils are recommended for initial and service fill and top-up of car, truck and tractor manual transmissions, differentials, final drives and transfer and steering gearboxes.

CHARACTERISTICS

IMPROVED THERMAL STABILITY: Hi-Tec EP Multigear Oils provide complete XHTR protection against the formation of sludge, oxidation and carbonaceous deposit build-up and excessive viscosity increases. This improved protection ensures longer service life of transmission components compared to traditional EP gear oils.

There are increased thermal stresses on modern high performance transmissions due to the following:

  • Change in vehicle aerodynamics
  • Wider use of driveline retarders
  • Increased “Power Density” for transmission and rear axles
  • Extended slow speeds and high loads
  • Higher ambient temperatures
  • Higher horsepower
  • Extended warranties/reduced maintenance

XHTR thermally stable Hi-Tec EP Multigear Oils not only effectively handle these conditions but LOWER operating temperatures by 100C or more due to the assistance provided by the free flowing base oil components and over treat levels of thermally stable EP additives.

Oxidation stable Hi-Tec EP Multigear Oils avoid other lubricant related high temperature degradation problems such as “coked” transmission synchronisers and reduced oil flow to gear and bearings (due to obstructed oil passageways or filters) so that costly transmission failures associated with lubricant do not occur.

OIL SEAL LIFE EXTENDED: XHTR thermally stable Hi-Tec EP Multigear Oils prevents high temperature premature seal failures. Without high temperature protection, decomposed lubricant sludge and deposits can build up in the seal area so that the seal underlip temperatures can be 20oC to 30oC higher than the bulk oil temperatures in the transmission unit. These temperatures lead to catastrophic degradation of the seal elastomer resulting initially in premature oil leakage and, if not controlled, in transmission failure due to inadequate lubricant supply. Hi-Tec EP Multigear Oils help prevent seal problems which often represented the number one complaint of axle and transmission manufacturers.

IMPROVED DURABILITY: Hi-Tec EP Multigear Oils provide excellent protection against fatigue pitting which is the life limiting variable of gear sets. OEM’s recognise that lubricant protection against pitting is a very important design variable for long transmission life. Field tests, laboratory spalling tests and power divider snap tests confirm that Hi-Tec EP Multigear Oils give long durability to gear sets.

CORROSION PROTECTION: Hi-Tec EP Multigear Oils provide better protection to copper alloys under both wet and dry conditions due to the incorporated special EP additives.

GEAR TRAIN RATTLE & NOISES ELIMINATED: The “stay on” properties of the high film strength Hi-Tec EP Multigear Oils effectively quieten transmission drive-line noise tendencies under conditions of low speed high torque, high speed low torque and shock loading. FOAM INHIBITORS: Hi-Tec EP Multigear Oils minimise the natural development of foam in transmissions in service. Foam is undesirable because it promotes ineffective gear lubrication with resultant premature wear.

******************************************
CI New Kits
Designed and manufactured to replace the clutch system installed as Original Equipment,
reliable is the term which best describes the CI standard replacement kits.
Each component has been thoroughly tested and developed by
CI for specific field applications within the Australian and New Zealand market place.
This range provides a Quality Assured replacement part that
will meet or exceed the requirements of an original vehicle. And after 60 years of experience in
developing and supplying clutch kits to the automotive aftermarket and OEM customer base,
we are well placed to provide Clutch Kits best suited to your region.
In fact, in many cases we were the Manufacturer of the Original Equipment part.
 

Warranty Form

WARRANTY FORM

MAKE SURE YOU READ TERMS FIRST > 

Download your warranty form by clicking the link below.

CLICK HERE TO DOWNLOAD FORM

Warranty is for a period of 12 months or 20,000 kilometres from the date of sale, whichever occurs first.

TO CLAIM WARRANTY,

YOU WILL BE ISSUED WITH A REPLACEMENT EITHER WAY

YOU WILL NOT BE ISSUED A REFUND FOR THE ITEM !!

WE RESERVE THE OPTION TO REPLACE OR REPAIR !

THERE IS 2 WAYS TO HANDLE THIS,

  1. YOU CAN BUY ANOTHER ITEM(S) OFF US , TO KEEP YOUR VEHICLE ON THE ROAD, AND SHOULD YOUR CLAIM COME BACK IN YOUR FAVOUR , WE WILL THEN CREDIT THE ORIGINAL ITEM, THAT WAY YOU ARE STILL ABLE TO USE THE VEHICLE.
  2. OR, YOU CAN RETURN THE ITEM AND AWAIT THE OUTCOME, IF YOUR CLAIM COMES BACK IN YOUR FAVOUR A REPLACEMENT UNIT WILL BE SHIPPED TO YOU FREE ASAP. (PLEASE NOTE CLAIMS CAN TAKE 2-4 WEEKS TO ASSESS)
  3. IF YOUR CLAIM COMES BACK, THAT IT IS NOT A WARRANTY CLAIM, THEN YOU ARE WELCOME TO HAVE THE REJECTED ITEM RETURNED TO YOU,(FREIGHT CHARGES WILL BE APPLICABLE TO YOU) WE WILL HOLD YOUR ITEM FOR 7 DAYS AFTER WE HAVE ADVISED IN WRITING OF THE OUTCOME, AFTER A FURTHER 7 DAYS AND WE HAVE NOT HEARD FROM YOU THE ITEM WILL BE DISPOSED OF.

Terms

Brett's Truck Parts warrants each part supplied and delivered to be free, under normal use and maintenance, from defects in material and workmanship according to the warranty conditions during the warranty period.

The terms of this warranty supersede and exclude all warranties, rights and remedies implied by law to the extent that such warranties, rights and remedies may lawfully be excluded.

Bretts Truck Parts' obligations under this warranty and the Trade Practices Act 1974 are limited to the extent that is lawfully repairing or replacing at Bretts Truck Parts' option the part or any part thereof subject to:

( i ) The part being returned to the place of business.

( ii ) Bretts Truck Parts being satisfied that the part is defective as a result of workmanship or material..

Bretts Truck Parts shall not be liable for damages for loss of profit or use in any circumstances whatsoever.

Exclusions:

Bretts Truck Parts' obligation under this warranty is limited to the credit of the purchase price, or replacement of the original part.

Cost for the removal and replacement of the part is NOT included.

Other fees and charges NOT covered by warranty include, but not limited to the following: Labour, retrieval fees, travel time, mileage, call out fee, incidental expenses, hire of plant, vehicles, machinery, lost time, lost profit, and other miscellaneous expenses.

Bretts Truck Parts require parts for inspection and evaluation by our engineering department, before any warranty undertaking is given.

Parts may be independently inspected and a report produced at our discretion.

Any subsequent report is subject to privacy laws, and will not be forwarded or contents made available to customers.

Bretts Truck Parts staff can not verbally promise to honour any warranty.

Request for warranty should be on your company form designated for this purpose. Relevant copies of invoices and other supporting documentation must be included, along with copy of our invoice where part was originally sold.

Complete the claim and return to Bretts Truck Parts.

Once claim is submitted, further items related to same claim can not be added.

 

Alternators & Starter Motors:

Alternators and Starter motors are subject to a warranty period of 6 months.

Units subjected to water damage will be rejected immediately.

 

Shipping Information

All our orders are carefully packaged and shipped with Australia Post and other carriers that we might use from time to time. 

PROCESSING TIMES 

Your order will be processed within 1-2 Business days. Most orders are shipped within 1 business day. 

SHIPPING TIMES (AUSTRALIA) 

Standard 1-5 Business Days 

Express 1-3 Business Days 

SHIPPING TIMES (INTERNATIONAL) 

Standard Shipping 3-20 Business Days

International "DO NOT USE A P.O BOX" You must sign for the actual item(s)

WE DO NOT SHIP CLUTCH KITS "FREE" THIS OFFER IS FOR AUSTRALIA ONLY !!

Returns Policy

We have a 7-day return policy, which means you have 7 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at parts@brettstruck.com.au. Please note that returns will need to be sent to the following address: 17 Craftsman Ave, Berkeley Vale NSW 2261, Australia

If your return is accepted, there will be a 20% handling fee and all Freight charges are not refunded. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at parts@brettstruck.com.au.

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). "ELECTRICAL" ITEMS OR ITEMS ON "SALE" OR "SPECIAL" OR "SPECIALLY ORDERED IN"ARE NOT RETURNABLE FOR REFUND. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

European Union 14 day cooling off period
Notwithstanding the above, if the merchandise is being shipped into the European Union, you have the right to cancel or return your order within 14 days, for any reason and without a justification. As above, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at parts@brettstruck.com.au.

Happy Customers

Brett's had the exact part I needed and shipped it same day. Arrived 2 days later. Couldn't do better than that.

Marblebah S/G ⭐⭐⭐⭐⭐

Always had my Mitsubishi Rosa parts bought here. Never had an issue and communication is pretty straightforward.

Sean Nguyen ⭐⭐⭐⭐⭐

These guys are fabulous!! I live in Canada with very uncommon trucks. Whenever i need to find a part these guys not only have it but help me make sure its the right one before i invest in the international shipping. Great prices to go along with it never hurts!

Jaxom ⭐⭐⭐⭐⭐

I order parts for my trucks from these guys, they are knowledgeable and prompt. Never had a problem. Good work 👍

Adam “AMAMW” W ⭐⭐⭐⭐⭐

Excellent service , reliable and very helpful and many thanks to there staff Warwick for helping me out when in need of part ..

Simon Salloum ⭐⭐⭐⭐⭐

Every time my time my truck breaks down these guys have what I need at the right price can't ask for better than that cheers !!!

Mick Carroll ⭐⭐⭐⭐⭐

Efficient, friendly,service, gave them make, year, model, engine details of my truck, paid over the phone Thursday for hard to get part which arrived at my gate on the Sunshine Coast onMonday just after lunch. Good service, prompt postage and delivery, up there wirh the best, Rod Bain

Rod Bain ⭐⭐⭐⭐⭐

Brett's Truck Parts

17 Craftsman Ave,

Berkeley Vale

NSW 2261

Mon - Fri, 8am - 4:30pm

Saturday, 8am - 11:3am

Sunday, CLOSED